Swimming of motile gyrotactic microorganisms and suspension of nanoparticles in a rheological Jeffery fluid with Newtonian heating along elastic surface |
Siddra RANA, Rashid MEHMOOD, M. M. BHATTI*, Mohsan HASSAN |
3279 |
Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid |
AFSHARI Faraz, S?ZEN Adnan, KHANLARI Ataollah, TUNCER Azim Do?u?* |
3297 |
Effects of turbulator shape, inclined magnetic field, and mixed convection nanofluid flow on thermal performance of micro-scale inclined forward-facing step |
E. JALIL, G. R. MOLAEIMANESH* |
3310 |
Thermal and concentration analysis of Phan-Thien-Tanner fluid flow due to ciliary movement in a peripheral layer |
Khadija MAQBOOL, Sidra SHAHEEN, Elena BOBESCU, R. ELLAHI* |
3327 |
Turbulent boundary layers and hydrodynamic flow analysis of nanofluids over a plate |
AOUINET Hana, DHAHRI Maher, SAFAEI Mohammad Reza*, SAMMOUDA Habib, ANQI Ali E. |
3340 |
Numerical investigation of flow and heat transfer behind a two-dimensional backward-facing step equipped with a semi-porous baffle |
Hamid-Reza BAHRAMI |
3354 |
Three-dimensional unsteady squeezing flow with irreversibility |
HAYAT T, AHMAD M Waqar, SHEHZAD S A*, ALSAEDI A |
3368 |
Significance of induced magnetic field and variable thermal conductivity on stagnation point flow of second grade fluid |
A. A. KHAN, S. ILYAS, T. ABBAS, R. ELLAHI* |
3381 |
Improving performance of flat plate solar collector using nanofluid water/zinc oxide |
SHOKRGOZAR ABBASI Ali*, KHAN Aghaiy Naser |
3391 |
Hydraulic and thermal analysis of automatic transmission fluid in the presence of nano-particles and twisted tape: An experimental and numerical study |
Ali QASEMIAN*, Faranak MORADI, Amin KARAMATI, Ali KESHAVARZ, Amin SHAKERI |
3404 |
Thermal stress distribution around a thermally-insulated polygonal cutout in graphite/epoxy composite laminates under heat flux |
Mohammad Hossein BAYATI CHALESHTARI, Hadi KHORAMISHAD* |
3418 |
Heat and mass transfer enhancement in triangular pyramid solar still using CNT-water nanofluid |
GHACHEM Kaouther*, KOLSI Lioua*, LARGUECH Samia, ALNEMER Ghada |
3434 |
Effects of rib on cooling performance of photovoltaic modules (PV/PCM-Rib) |
Amir SADEGHIAN, Mehran Rajabi ZARGARABADI*, Maziar DEHGHAN |
3449 |
Performance investigation of solar thermal collector with auxiliary heater for space heating |
Hassan BIGLARIAN, Mohammad Mazidi SHARFABADI*, Mansour ALIZADEH, Hossein GHARAEI |
3466 |
Passive heat transfer enhancement of laminar mixed convection flow in a vertical dimpled tube |
M. TOOFANI SHAHRAKI, A. LAVAJOO, A. BEHZADMEHR* |
3477 |
An advanced turbulator with blades and semi-conical section for heat transfer improvement in a helical double tube heat exchanger |
Seyed Hossein HASHEMI KAROUEI, Seyed Soheil MOUSAVI AJAROSTAGHI*, Saman RASHIDI, Elham HOSSEINIRAD |
3491 |
Experimental investigation of thermal performance characteristics of sintered copper wicked and grooved heat pipes: A comparative study |
Saif Ullah KHALID, Hafiz Muhammad ALI*, Muhammad Ali NASIR, Riffat Asim PASHA, ZAFAR SAID, L. Syam SUNDAR, Ahmed Kadhim HUSSEIN |
3507 |
Effect of different heat transfer fluids on discharging performance of phase change material included cylindrical container during forced convection |
SEL?MEFEND?G?L Fatih*, ??R?N Ceylin, ?ZTOP Hakan F. |
3521 |
Combined effects of local curvature and elasticity of an isothermal wall for jet impingement cooling under magnetic field effects |
SEL?MEFEND?G?L Fatih*, ?O?AN Mehmet, ?ZTOP Hakan F. |
3534 |
Second-order modeling of non-premixed turbulent methane-air combustion |
Ali ERSHADI, Mehran RAJABI ZARGARABADI* |
3545 |
Experimental investigation of effect of refrigerant gases, compressor lubricant and operating conditions on performance of a heat pump |
AFSHARI Faraz, S?ZEN Adnan, KHANLARI Ataollah, TUNCER Azim Do?u?, ALI Hafiz Muhammad* |
3556 |
CFD investigation of effect of nanofluid filled Trombe wall on 3D convective heat transfer |
ALBAQAWY Ghazy, MESLOUB Abdelhakim, KOLSI Lioua* |
3569 |
Thermal performance of a single U-tube ground heat exchanger: A parametric study |
Seyed Soheil MOUSAVI AJAROSTAGHI, Hossein JAVADI, Seyed Sina MOUSAVI, Sébastien PONCET*, Mohsen POURFALLAH |
3580 |
Thermal stress investigation of glazing unit filled with paraffin in cold regions |
ZHOU Ying-ming(周英明), WU Guo-zhong(吴国忠)*, LI Dong(李栋), Müslüm ARICI*WANG Ze-mei(王泽美), FU Shi-bo(付世博), ?a?atay YILDIZ, A. Arma?an ARICI |
3599 |
Thermal performance analysis of building construction with insulated walls in summer days and nights |
CHEN Ya-bin(陈雅斌), PEI Xing-wang(裴兴旺)*, HAN Bing-zheng(韩兵正) |
3613 |
Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing |
A. ALIKHANI, R. BEYGI*, M. ZAREZADEH MEHRIZI, F. NEMATZADEH, I. GALV?O |
3626 |