自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
 

Journal of Central South University

中南大学学报(英文版)

Vol. 12    Special 2    August 2005


Developing remanufacturing engineering,constructing cycle economy and building saving-oriented society 徐滨士,刘世参,王海斗 1
Key technologies in whole lifecycle of electromechanical products: state of art 段广洪,向东,牟鹏 7
Investigations and practices on green manufacturing in machining systems 刘飞,尹家绪,曹华军,何彦 18
Benefit analysis and contribution prediction of engine remanufacturing to cycle economy 刘世参,史佩京,徐滨士,邢忠,谢建军 25
Failure analysis used for remanufacturing of steel rolling components 王海斗,徐滨士,魏世丞,张显程,金国,姜祎 30
Machining process model based on virtual reality environment 王太勇,范胜波,罗珺,汪文津,汪文颖 34
Comparison of tribological properties for graphite coatings used for remanufacturing 朱玉岭 41
Structural integrity and life extension of high-temperature components 汪淳,沈士明 45
Residual stresses within sprayed coatings 姜祎,王海斗,徐滨士 53
Decision-making of biomass ethanol fuel policy based on life cycle 3E assessment 冷如波,戴杜,陈晓军,王成焘 59
Uncertainty in life cycle economical analysis of cassava-based ethanol fuel 冷如波,戴杜,陈晓军,王成焘 65
Fatigue life prediction of crankshaft repaired by twin arc spraying 张国庆,王成焘,浦耿强 70
Using hybrid modeling for life cycle assessment of motor bike and electric bike 戴杜,冷如波,王成焘,张成 77
Life cycle of remanufactured engines 杨明,陈铭 81
Dynamic grey model of verification cycle and lifecycle of measuring instrument and its application 苏海涛,杨世元,沈毛虎,董华 86
Life cycle detection of prestress in large prestressed reinforcement structures 金秀梅,杜彦良,孙宝臣 90
An estimation method for direct maintenance cost of aircraft components based on particle swarm optimization with immunity algorithm 吴静敏,左洪福,陈勇 95
Metal magnetic memory testing for early damage assessment in ferromagnetic materials 董丽虹,董丽虹,徐滨士,董世运,陈群志,王愈涯,张蕾,王丹,尹大伟 102
Characteristics of magnetic memory signals for medium carbon steel under static tensile conditions 尹大伟,尹大伟,尹大伟,徐滨士,董世运,董丽虹,杨尚林 107
Fatigue properties of 48MnV steel with twin arc spraying 3Cr13 coatings 张国庆,苏冰,浦耿强,王成焘 112
Analysis of corrosion failure of petrochemical pipe elbow 吕涛 119
Failure analysis of wear of main clutch separating ring of heavy vehicles 孙晓龙,李晓延,朱有利,徐滨士 124
Remanufacturing system based on totally automatic MIG surfacing via robot 朱胜,郭迎春,杨培 129
Scanner external calibration algorithm based on fixed point in robot remanufacturing system 朱胜,崔培枝,沈灿铎,郭迎春 133
Sustainable manufacturing for obsolete computers based on 3R engineering 史佩京,许一,王红美,徐滨士 138
Remanufacturing strategy for chemical equipment 张显程,张显程,徐滨士,王海斗,姜祎,吴毅雄,巩建鸣,涂善东 142
Residual fatigue strength of 48MnV crankshaft based on safety factor 王翔,陈铭,浦耿强,王成焘 145
Investigation on end-of-life electric and electronic equipment recycling and disposal system in China: legislation, education and dissemination 陈铭 148
End-of-life vehicle recycling based on disassembly 王翔,秦晔,陈铭,王成焘 153
Recycling process assessment of mechanical recycling of printed circuit board 潘君齐,刘志峰,刘光复,王淑旺,黄海鸿 157
Key technologies of layout design of recycling plants of waste refrigerators 吕义,刘志峰,王淑旺,戚赟徽 162
A bi-objective model for job-shop scheduling problem to minimize both energy consumption and makespan 何彦,刘飞,曹华军,李聪波 167
Morphology and tribological properties of Ni/n-SiO2 composite coatings by pulse-reverse current brush-plating 谭俊,郭文才,杨红军,周亮 172
Sand-wear resistance of brush electroplated nanocomposite coating in oil and its application to remanufacturing 董世运,徐滨士,杜令忠,杨华 176
High temperature tribological behaviors of nano-diamond as oil additive 乔玉林,孙晓峰,徐滨士,马世宁 181
Analysis of self-repair films on friction surface lubricated with nano-Cu additive 刘谦,许一,史佩京,于鹤龙,徐滨士 186
Design and micro mechanical properties of nano-SiO2 strengthened composite coatings towards remanufacturing 王红美,刘存龙,史佩京,徐滨士 190
High-temperature corrosion-resistance performance of electro-thermal explosion spraying coating 魏世丞,徐滨士,王海斗,金国 195
Automatic brush-plating technology for component remanufacturing 吴斌,徐滨士,荆学东,刘存龙,张斌 199
Preparation of nano-copper as lubrication oil additive 王晓丽,徐滨士,许一,于鹤龙,史佩京,刘谦 203
Microstructure and wear resistance of electro-thermal explosion sprayed stellite coating used for remanufacturing 金国,金国,徐滨士,王海斗,魏世承,李庆芬 207
New pattern Zn-Al-Mg-RE coating technics for steel structure sustainable design 刘燕,刘燕,徐滨士,朱子新,栗卓新,马洁 211
Design of wear-out-failure in-situ repair parts by environment-friendly nanocopper additive 徐滨士,许一,王晓丽,刘谦 215
Oxidation performance of Fe-Al/WC composite coatings produced by high velocity arc spraying 孟凡军,徐滨士,朱胜,马世宁,张伟 221
Ultraviolet shielding property of crylic acid resin filled with nano-SiO2 阎瑞,吴行,马世宁,徐滨士 226
Method of lines for temperature field of functionally graded materials 戴耀,孙琦,郝贵祥,燕秀发,李永东 230
Effect of nitrocarburizing on sulphide layer during nitrocarburizing-sulphurating treatment 李新,马世宁,刘吉延 233
Tribological properties of nanostructured n-Al2O3/Ni coatings deposited by plasma spraying 李长青,马世宁,叶雄林 237
Corrosion resistance of plasma sprayed NiCrAl+(ZrO2+Y2O3) thermal barrier coating on 18-8 steel surface 陈飞,陈飞,吕涛,周海,刘凯,丁华东 242
Properties of plasma sprayed NiCrAlY+(ZrO2+Y2O3) coating on refractory steel surface 吕涛,陈飞,韩丹凤,丁华东 246
A novel surface-repairing technique for gun bore 苏冰,于旭东,吴斌,王成焘 250
Three-dimensional finite element analysis of critical pre-twist strain angle for torsional axis 周国锋,李晓延,史耀武,徐滨士 254
Characterization of functionally graded ZrO2 thermal barrier coatings sprayed by supersonic plasma spray with dual powder feed ports 韩志海,韩志海,王海军,周世魁,徐滨士 257
A new monitoring method of cable tension of cable-stayed bridge—fiber Bragg grating method 张戌社,杜彦良,宁辰校 261
Prediction of diameter errors compensation in bars turning 范胜波,王太勇,汪文津,冷永刚 264
Conformal analysis of fundamental frequency of vibration of simple-supported elastic ellipse-plates with concentrated substance 齐红元,朱衡君 269
Effect of weld on design of steel moment-resisting connection reinforced with steel plates 陈鹏,黎永 274

    Editor:彭超群

版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765(中) 88836963(英) 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号