Materials, Metallurgy, Chemistry and Chemical Engineering |
Fracture toughness and fatigue crack growth analysis of 7050-T7451 alloy thick plate with different thicknesses |
WANG Yi-lin(王艺淋), PAN Qing-lin(潘清林), WEI Li-li(韦莉莉), LI Bo(李波), WANG Ying(王迎) |
2977 |
Microstructure and mechanical properties of AZ31 alloy ingot fabricated by semi-continuous casting |
LI Jin-zhu(李金柱), NONG Deng(农登), ZHENG Kai-hong(郑开宏), LI Xiao-hui(黎小辉), ZHAO Ming-chun(赵明纯) |
2984 |
Brazing behavior of ultrafine cemented carbide with stainless steel |
YANG Tian-en(杨天恩), YANG Li(杨力), XIONG Ji(熊计), SUN Lan(孙兰), GUO Zhi-xing(郭智兴), ZHENG Xiao-ming(郑晓鸣) |
2991 |
Numerical analysis of interaction between solute atom and extended dislocation using force multipoles |
Hiroaki Morita, Akiyuki Takahashi |
3000 |
Synthesis of flowerlike nickel particles and their microwave absorbing properties |
QI Hai-ping(齐海萍), CAO Hai-lin(曹海琳), HUANG Yu-dong(黄玉东) |
3007 |
Adjustable transmission properties through ring-shaped nanotube arrays using finite-difference time-domain method |
ZHOU Feng-qi(周凤麒), LIU Zhi-min(刘志敏), LI Hong-jian(李宏建), LIU Er-gen(刘二根) |
3013 |
FEM analysis of vacuum hot bulge forming of Hastelloy C-276 thin-walled cylindrical workpiece |
ZHU Zhi(朱智), ZHANG Li-wen(张立文), GU Sen-dong(顾森东) |
3019 |
Effects of process parameters on warpage of rapid heat cycle moulding plastic part |
LIU Dong-lei(刘东雷), XIN Yong(辛勇), CAO Wen-hua(曹文华), SUN Ling(孙玲) |
3024 |
Effect of surface treatment to inserted ring on Al–Fe bonding layer of aluminium piston with reinforced cast iron ring |
SUN Lan(孙兰), LI Chang-an(李长案), TU Jing-wen(屠静雯), PENG Ming-cheng(彭明诚) |
3037 |
Calcium ferrite formation characteristic during iron ore sintering with different oxygen atmospheres |
MAO Xiao-ming(毛晓明), YOU Zhi-xiong(游志雄), ZHANG Yuan-bo(张元波), FAN Zhen-yu(范振宇), LI Guang-hui(李光辉), JIANG Tao(姜涛) |
3043 |
Effect of catalyst on formation of poly(methyl methacrylate) brushes by surface initiated atom transfer radical polymerization |
LIU Hui(刘辉), ZHOU Wan-zhu(周晚珠), YE Hong-qi(叶红齐), HAN Kai(韩凯), HOU Shi-chuan(侯世川), ZHANG Xin-yue(张欣悦) |
3049 |
Effects of coagulation bath temperature on structure and performance of poly (vinyl butyral) hollow fiber membranes via thermally induced phase separation |
ZHANG Ming(张明), QIU Yun-ren(邱运仁) |
3057 |
Characterization of stereostructure by X-ray and technology of extracting in combination hydrolysis in situ of acankoreanogenin from leaves of Acanthopanax gracilistylus W. W. Smith |
DAI Ling(戴玲), LIU Xiang-qian(刘向前), XIE Xia(谢霞), LIU Heng-yan(刘恒言) |
3063 |
Mechanical Engineering, Control Science and Information Engineering |
Numerical investigation of water-entry of flatted-bottom seafloor mining tool in ocean waves |
HU Xiao-zhou(胡小舟), LIU Shao-jun(刘少军) |
3071 |
Path planning for unmanned aerial vehicles in surveillance tasks under wind fields |
ZHANG Xing(张兴), CHEN Jie(陈杰), XIN Bin(辛斌) |
3079 |
Multistatic radar analysis based on ambiguity function and Cramér-Rao lower bounds |
LEI Peng-zheng(雷鹏正), HUANG Xiao-tao(黄晓涛) |
3092 |
Waveforms analysis and optimization of new electro-hydraulic excitation technology |
HAN Dong(韩冬), GONG Guo-fang(龚国芳), YANG Hua-yong(杨华勇), LIU Yi(刘毅), LIAO Xiang-ping(廖湘平) |
3098 |
Regeneration of grinding wheel active surface using high-pressure hydro-jet |
Krzysztof NADOLNY, Jaroslaw PLICHTA, Pawel SUTOWSKI |
3107 |
Control strategy for energy recovery system in hybrid forklift |
GONG Jun(龚俊), HE Qing-hua(何清华), ZHANG Da-qing(张大庆), ZHAO Yu-ming(赵喻明), LIU Chang-sheng(刘昌盛), TANG Zhong-yong(唐中勇) |
3119 |
Coordination of multiple grid-connected inverters for harmonic compensation |
GUO Xiao-rui(郭晓瑞), GUO Ji-feng(郭吉丰), WANG Jian(王剑) |
3126 |
An electrophoretic display driving waveform based on improvement of activation pattern |
YI Zi-chuan(易子川), BAI Peng-fei(白鹏飞), WANG Li(王利), ZHANG Xiao(张晓), ZHOU Guo-fu(周国富) |
3133 |
An overview of intelligent selection and prediction method in heterogeneous wireless networks |
Yass K. Salih, Ong Hang See, Rabha W. Ibrahim, Salman Yussof, Azlan Iqbal |
3138 |
Multiple k-hop clusters based routing scheme to preserve source-location privacy in WSNs |
REN Ju(任炬), ZHANG Yao-xue(张尧学), LIU Kang(刘康) |
3155 |
Interference management via access control and mobility prediction in two-tier heterogeneous networks |
XIAO Zhu(肖竹), CHEN Jie(陈杰), WANG Dong(王东), LI Ren-fa(李仁发), YI Ke-chu(易克初) |
3169 |
TCAR: A new network coding-aware routing mechanism based on local topology detection |
WANG Wei-ping(王伟平), WU Wei(吴伟), GUAN Qing-juan(关庆娟), WANG Jian-xin(王建新) |
3178 |
SATVPC: Secure-agent-based trustworthy virtual private cloud model in open computing environments |
XU Xiao-long(徐小龙), TU Qun(涂群), BESSIS Nik, YANG Geng(杨庚), WANG Xin-heng(王新珩) |
3186 |
A hybrid cuckoo search algorithm with feasibility-based rule for constrained structural optimization |
LONG Wen(龙文), ZHANG Wen-zhuan(张文专), HUANG Ya-fei(黄亚飞), CHEN Yi-xiong(陈义雄) |
3197 |
NAND flash service lifetime estimate with recovery effect and retention time relaxation |
BU Kai(步凯), , CHEN Yi-ran(陈怡然), XU Hui(徐晖), YI Wei(易伟), XIE Qi-you(谢启友) |
3205 |
Energy and Power Engineering, Environmental Engineering, and Mining Engineering |
A new solar coupling regeneration method for liquid desiccant air-conditioning system |
CHENG Qing(程清), ZHANG Xiao-song(张小松), XU Yao(许尧) |
3214 |
A new evaluation method of gel’s dynamic sealing characteristic in porous media |
WU Zhi-wei(吴志伟), YUE Xiang-an(岳湘安), LI Li-feng(李立峰), ZHANG Yi(张义), YANG Zhi-guo(杨志国) |
3225 |
Regeneration of waste activated carbon after extracting gold with steam under microwave heating: Optimization using response surface methodology |
ZUO Yong-gang(左勇刚), ZHANG Li-bo(张利波), PENG Jin-hui(彭金辉), C. SRINIVASAKANNAN, LIU Bing-guo(刘秉国), MA Ai-yuan(马爱元) |
3233 |
Characterization and recycling of nickel- and chromium-contained pickling sludge generated in production of stainless steel |
LI Xiao-ming(李小明), XIE Geng(谢庚), HOJAMBERDIEV Mirabbos, CUI Ya-ru(崔雅茹), ZHAO Jun-xue(赵俊学) |
3241 |
Numerical simulation of dynamic process for liquid film spreading by lattice Boltzmann method and its experimental verification |
LIU Qiu-zu(刘邱祖), KOU Zi-ming(寇子明), HAN Zhen-nan(韩振南) |
3247 |
Influence of heavy metal stress on morphology and physiology of Penicillium chrysogenum during bioleaching process |
DENG Xin–hui(邓新辉), CHAI Li-yuan(柴立元), YANG Zhi-hui(杨志辉), WANG Yang-yang(王洋洋) |
3254 |
Geological Engineering, Civil Engineering, Traffic and Transportation Engineering |
Formation mechanism of reservoir oolitic dolomite in Lower Triassic Feixianguan formation, northeastern Sichuan Basin, southwest China |
CHEN Pei-yuan(陈培元), TAN Xiu-cheng(谭秀成), LIU Hong(刘宏), MA Teng(马腾), LUO Bing(罗冰), JIANG Xing-fu(姜兴福), YU Yang(于洋), JIN Xiu-ju(靳秀菊) |
3263 |
Basic dynamic characteristics and seismic design of anchorage system |
DUAN Jian(段建), YAN Zhi-xin(言志信), REN Zhi-hua(任志华), ZHAO Hong-liang(赵红亮) |
3275 |
Identifying boundary between near field and far field in ground vibration caused by surface loading |
GAO Guang-yun(高广运), SONG Jian(宋健), YANG Jun(杨峻) |
3284 |
Designing and implementation of variance-dependent Goldstein radar interferogram filtering |
WANG Qi-jie(王琪洁), ZHANG Xiao-hu(张小虎), ZHU Jian-jun(朱建军), HU Jun(胡俊) |
3295 |
Numerical simulation on effects of embedded crack on rock fragmentation by a tunnel boring machine cutter |
LIU Jie(刘杰), CAO Ping(曹平), JIANG Zhe(蒋喆), ZHAO Yan-lin(赵延林), CAO Ri-hong(曹日红) |
3302 |
Probabilistic analysis of random contact force between geomembrane and granular material |
JIANG Xiao-zhen(姜晓桢), SHU Yi-ming(束一鸣) |
3309 |
Spatial acoustic emission evolution of red sandstone during multi-stage triaxial deformation |
YANG Sheng-qi(杨圣奇), NI Hong-mei(倪红梅), WEN Sen(温森) |
3316 |
A theoretical analysis of vertical dynamic response of large-diameter pipe piles in layered soil |
DING Xuan-ming(丁选明), ZHENG Chang-jie(郑长杰), LIU Han-long(刘汉龙) |
3327 |
Orthogonal design and numerical simulation of room and pillar configurations in fractured stopes |
WU Ai-xiang(吴爱祥), HUANG Ming-qing(黄明清), HAN Bin(韩斌), WANG Yi-ming(王贻明), YU Shao-feng(于少峰), MIAO Xiu-xiu(缪秀秀) |
3338 |
Numerical calculation on solar temperature field of a cable-stayed bridge with U-shaped section on high-speed railway |
LIU Wen-shuo(刘文硕), DAI Gong-lian(戴公连), RAO Shao-chen(饶少臣) |
3345 |
An analysis method for correlation between catenary irregularities and pantograph-catenary contact force |
QIN Yong(秦勇), ZHANG Yuan(张媛), CHENG Xiao-qing(程晓卿), JIA Li-min(贾利民), XING Zong-yi(邢宗义) |
3353 |
Effect of granite gravel content on improved granular mixtures as railway subgrade fillings |
CHEN Xiao-bin(陈晓斌), LI Zhi-yong(李志勇), ZHANG Jia-sheng(张家生) |
3361 |
Mechanical response of transmission lines based on sliding cable element |
LIU Yun(刘云), QIAN Zhen-dong(钱振东), XIA Kai-quan(夏开全) |
3370 |
Joint analysis of urban shopping destination and travel mode choice accounting for potential spatial correlation between alternatives |
LIN Yao-yu(林姚宇), DING Chuan(丁川), WANG Yao-wu(王耀武), LIU Chao(刘超), CUI Yu-chen(崔愉晨), Sabyasachee Mishra |
3378 |
Freights loading optimization with balanced and unconcentrated loading constraints |
ZHU Xiang(朱向), LEI Ding-you(雷定猷), ZHANG Ying-gui(张英贵) |
3386 |
Allocation optimization of bicycle-sharing stations at scenic spots |
GUO Tang-yi(郭唐仪), ZHANG Ping(张平), SHAO Fei(邵飞), LIU Ying-shun(刘英舜) |
3396 |
Understanding taxi driver’s cruising behavior with ZIP model |
ZONG Fang(宗芳) |
3404 |
Implementation of road horizontal alignment as a whole for CAD |
YANG Liu(杨柳), ZHENG Jian-long(郑健龙), ZHANG Rui(张锐) |
3411 |