自然科学版 英文版
自然科学版 英文版
自然科学版 英文版

您目前所在的位置:首页 - 期刊简介 - 详细页面

中南大学学报(自然科学版)

Journal of Central South University

第34卷    第2期    总第150期    2003年4月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1005-9792(2003)02-0122-03
C/C复合材料及高强石墨的滑动摩擦磨损行为
冯一雷,易茂中,彭春兰,葛毅成,黄伯云

(中南大学粉末冶金国家重点实验室,湖南 长沙,410083)

摘 要: 在M-2000环-块摩擦试验机上测试了C/C复合材料及当前拟用作航空发动机主轴密封环材料的高强石墨的摩擦磨损行为.对材料试样在荷载为60,80,100,120和150 N时的摩擦磨损行为进行研究,得出:高强石墨材料试样摩擦因数为0.22~0.24,而C/C复合材料试样摩擦因数仅为0.08~0.12.在80 N时,2号试样体积磨损量达10.09×10-4cm3/次,而3号试样体积磨损量仅为1.36×10-4cm3/次;C/C复合材料与高强石墨材料相比摩擦因数低且稳定,磨损量小.这表明C/C复合材料比高强石墨材料更适合用作航空发动机主轴密封环.

 

关键字: 炭/炭复合材料;石墨;摩擦;磨损

Fiction and wear behaviors of C/C
composites and high strength graphite
FENG Yi-lei, YI Mao-zhong, PENG Chun-lan, GE Yi-cheng, HUANG Bai-yun

State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China

Abstract:The friction properties of C/C composites and high strength graphite are supposed to be used as the seal ring of the main axis of aeroplane engine which tested on ring-mass frictional tester of M-2000.The coefficient of friction of high strength graphite is 0.22~0.24, while that of C/C composites is only 0.08~0.12 under different pressure 60, 80, 100, 120 and 150 N.When the pressure is 80 N, the volume wear of the sample No.2 is 10.09×10-4cm-3while that of the sample No.3 is only 1.36×1010-4cm-3.The results show that C/C composites have lower and constant coefficient and lower weight loss than that of high strength graphite.It indicates that C/C composites have advantage over high strength graphite when it is used as the seal ring of the main axis of aeroplane engine.

 

Key words: C/C composites; graphite; friction; wear

中南大学学报(自然科学版)
  ISSN 1672-7207
CN 43-1426/N
ZDXZAC
中南大学学报(英文版)
  ISSN 2095-2899
CN 43-1516/TB
JCSTFT
版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号